Posts Tagged ‘thermometer’
After bringing my Nanode based temperature sensor back to life I thought about some other projects that I might do. One was simply to add an external sensor to the Nanode project, and another was to turn my slow cooker into a sous vide water bath (along the lines of ‘Sous Vader‘). Those projects would need […]
Filed under: howto, Raspberry Pi | 7 Comments
Tags: 18B20, 1wire, DS18B20, kernel, modprobe, module, onewire, Raspberry Pi, Raspi, RPi, sensor, temperature, thermometer, w1-gpio, w1-therm
Return of the Nanode thermometer
It’s almost a year since I built my Nanode thermometer, and it looks like another really cold snap is headed towards the UK – perhaps snow over the weekend. I’ve not had it set up for a little while, as the TMP36 sensor was reclaimed for a project that put Scratch and an Arduino together […]
Filed under: Arduino, code | Leave a Comment
Tags: arduino, bash, csv, date, lynx, Nanode, network, printf, script, sed, sensor, temperature, thermometer
Nanode thermometer
I first heard about Nanode (a low cost board that brings together Arduino and ethernet) via Andy Piper, then a few days later I had the fortune of seeing its creator Ken Boak speak at London’s Open Source Hardware Users Group (OSHUG). The week afterwards Ken was at the excellent Monkigras event, and did a short […]
Filed under: Arduino, code | 2 Comments
Tags: arduino, Nanode, network, sensor, temperature, thermometer, web